If your Xfinity Router has lights, it would be easier to detect the problem because these lights will show whether or not something is amiss with the equipment. You may also tell whether there is an issue right now by looking at the lights on your router. Occasionally, you may observe an orange light blinking on your Xfinity router. According to several accounts, when connected to the Xfinity network, Xfinity Router Blinking Orange.
But what will you do in case you notice an orange light blinking on your router? Don’t be concerned. This post will look at how to fix Xfinity Router Blinking Orange.
[lwptoc]
How to Fix Blinking Orange Light On Router
A firmware upgrade on the router might cause the Xfinity Router Blinking Orange light. Do not switch off the router in this scenario. Instead, allow the firmware upgrade to finish.
A broken or malfunctioning splitter might also trigger the orange blinking light. In addition, weather-related outages or scheduled maintenance may cause the orange blinking. Finally, a faulty router or modem might also cause it.
As you can see, the Xfinity router blinks orange for various reasons. As a result, we have included many workarounds in this post to address this Xfinity Modem Blinking Orange issue.
Contact the support team if the solutions in this article do not address the problem. Nonetheless, let us attempt to solve the Xfinity Router Blinking Orange reddit problem ourselves.
Use an Ethernet Connection
Your Xfinity gateway may blink orange if your internet connection is down. You may be unable to connect to Wi-Fi in this scenario.
To address this problem, you can use an Ethernet cable. Moreover, the Xfinity Internet Getting Started Kits already include Ethernet cables.
So, first, disconnect the power cable. Then, ensure that all cords are unplugged from the router.
Connect one end of the ethernet cable to your router and the other to your modem.
Then connect all of the remaining wires. Connect the router and modem to their respective power sources next.
Reboot Router
If there is a problem, you should always reboot or power cycle your router. It is because practically any issue may be solved with this easy repair.
Furthermore, you can go on to the next solution if that doesn’t work. But, before we go any further, let’s restart the router.
Rebooting the Xfinity router may be done manually or using the Xfinity App. However, if the orange light on your router blinks, your network connection is most likely down, and the Xfinity App will be ineffective.
As a result, you will have to resolve the Xfinity Router Blinking Orange issue manually. First, unplug the router from the power supply to accomplish this. Then, after 10-15 seconds, reconnect the router.
Check Splitter
Another reason your Xfinity modem lights blinking orange is a faulty or malfunctioning splitter. As a result, you may connect the internet cable directly to your Xfinity router and test it.
Afterward, check if your router still has the blinking orange light on.
Service Outage
During a service outage, the signal strength might also be reduced, causing the orange light to blink. So, open the Xfinity App on your mobile device to see whether the service is down.
After the Xfinity service outage is over, all orange lights must be repaired. And in this circumstance, the best thing to do is to wait or contact your ISP for further information about the Xfinity router orange light problem.
ALSO SEE: Getting Windows Ready Stuck in Windows 11
You can follow some easy steps below to get connected via the Xfinity App:
- Check whether your service has been interrupted first.
- Afterward, open the Xfinity My Account app on your smartphone.
- You must then sign in to your Comcast account.
- You’ll need to click on the ‘Check for Service Interruptions‘ button.
Xfinity Customer Support can even assist you if you encounter any issues with your router.
Check the Cables
When we replace our equipment, we may mistakenly detach a cable, cause the connection to fail, or attach the cable to the incorrect port.
Perhaps we were cleaning around it or relocating the router to boost the WiFi signal. These situations, however, can cause an Xfinity Router Blinking Orange.
To solve this, all of the wires must be verified. Also, please make certain that they fit snugly into the ports. Check the cables at both ends as well. Also, make certain that the connections are connected to the right ports.
Let the Update Finish
When the Xfinity gateway blinks orange, it is possible that the firmware is being updated. The firmware in a gadget is just the software that is written into it to ensure its proper operation.
Your Xfinity system also undergoes software updates from time to time, like PCs and mobile devices. And any troubles with your modem may be rectified by these upgrades or the installation of new functionality.
So, as long as that is the case, there is nothing you can do. You must wait for the update to be finished. It is required for your modem to function properly. And the upgrade will take a few minutes.
However, if it takes more, there may be another issue.
Final Words – Xfinity Gateway Blinking Orange
When the Xfinity Router Blinking Orange no internet, this is not the usual router behavior. Please correct it as soon as possible. Before calling Xfinity assistance, you may attempt all the methods listed above. You may also contact the Xfinity support team if trying to repair the orange light problem yourself proves to be too tough.