Site icon TechPager

How Do I Fix Toshiba Fire TV Remote Not Working Issue

Toshiba Fire TV Remote Not Working

If you have found your Toshiba Fire TV Remote Not Working, don’t give up hope yet!

Replacing a broken or misplaced Fire TV remote is an essential operation. Your current Fire TV edition or Insignia will quickly pair with the Fire TV app. It also keeps your previous remote control’s full voice control capabilities by using Bluetooth and IR technology. It does, however, have certain problems.

Many people have reported having difficulties using the Toshiba Fire TV remote app. They are also unable to stream content. If you’re having the same problem, check out the advice below to figure out why your Toshiba Fire TV Remote Not Working.

[lwptoc]

Fix: Toshiba Fire TV Remote Not Working Issue in 2022

Toshiba Fire TV Remote Not Working can occur for several reasons. The most typical cause is a broken TV. Alternatively, a malfunctioning button on your Toshiba Fire TV remote may have been stuck.

To fix the Toshiba Fire TV remote not working issue, use the following troubleshooting steps:

Power Cycling Remote

Because, even after the batteries are removed, the remote still includes capacitors that store some power. As a result, until the capacitors are exhausted, it will not entirely reset.

The remote’s capacitor discharges its charge when the power button is pressed. As a result, regardless of how easy it may appear, this is a critical step.

You might find it unusual at first as well. However, if you hit all of the buttons on the TV Toshiba com remote at once, it may start working again.

Remote controllers frequently have jammed buttons. If one or more of the buttons on your remote become stuck, you will be unable to use the other buttons.

In addition, a remote button might become stuck in various ways. For example, because it landed between the couch cushions, the rubber may have become caught beneath it.

But, no matter how you look at it, it’s a rather frequent issue that is readily remedied.

You should slam all the buttons and smack the remote twice on your palm. And the buttons will reappear.

When you flip it over, the buttons should be facing down. Slap the dirt off of the rear of the car. Don’t be concerned about the remote becoming damaged; the Toshiba Fire TV remote is quite sturdy.

If none of things works, try leaving the remote’s batteries at this time. And continue to hold down the power button for 60 seconds.

This easy reset will almost certainly solve your Toshiba Fire TV Remote Not Working Issue.

Factory Reset Your Fire TV Remote

You may also try resetting the remote to factory settings to resolve the Toshiba Fire TV Remote Not Working issue.

If you’re wondering what factory resetting accomplishes, it effectively erases all of the settings on your remote.

Instead, we will reset all remote settings to their factory defaults. To factory reset your remote effectively, press and hold the left DPAD-left, back, and menu buttons for around 10 seconds.

Try Pairing the Remote Again

Toshiba Fire TV remote pairing: Perhaps you haven’t correctly paired your remote, which might explain your problem. You can resolve this Toshiba Fire TV Remote Not Working issue by repeating the pairing procedure.

The Home key must be pushed and held down to link the remote. It can be found for around five seconds on the remote.

When you press the button, your remote should try to link automatically.

If the remote does not pair, you may need to switch the TV and remote off for a few moments before attempting again.

Replace Batteries

Because battery power is the remote’s primary power source, using it for an extended period might cause battery degeneration. Furthermore, the batteries in your remote may have been put in wrongly.

In this instance, the remote will immediately stop working. As a result, it’s advised that you replace your remote batteries with new ones.

Confirm Remote’s IR Sensor is Working

Your TV and remote employ an infrared beam to deliver and receive messages. If this beam is not functioning correctly, it might immediately cause your remote to stop operating.

Using the camera on your phone is a quick method to see if your remote’s IR is working:

  1. Simply go to your phone’s camera app. Then, look through the screen at your remote.
  2. Hit any button on the remote control.
  3. A red light will blink through the camera screen with each button click of a working remote.
  4. If you do not see a red light, it is possible that the remote is malfunctioning or that the batteries are dead.

Update your TV

Make sure your TV’s firmware is up-to-date. A stale version can cause the device to perform poorly.

ALSO SEE: ‘Unfortunately Email Has Stopped’ Error On Samsung Galaxy S10

And this may result in both the device & the remote not working.

Remove Obstacles

A typical issue is a blockage between your remote and your TV. Remote controls and televisions, which employ infrared beams, must be capable of sending and receiving this beam without interference.

Obstacles include a wall, other electrical signals such as Bluetooth, or bulky items such as furniture or speakers.

If you observe a blockage between your Toshiba Fire TV remote and the TV, consider relocating it to a different spot.

You may also direct the remote to the TV’s sensor. For example, a simple adjustment in the seat or the relocation of attractive furnishings can solve the Toshiba Fire TV Remote Not Working problem.

Contacting Support

If you have not been capable of resolving the problem thus far, you should call customer service. A member of the support staff will look into your Remote Not Working on Toshiba Fire TV issue.

Final Words

If you have tried all of the above techniques and your Toshiba Fire TV Remote Not Working, your only alternative is to replace it if you cannot fix Fire TV not responding to the remote. Unfortunately, it is conceivable that the remote is beyond repair at times. And if that’s the case, there’s not much you can do about it.

Exit mobile version